Skip to main content

Bluetooth Module hc-05

 HC-02 Bluetooth serial communication module is based on the Bluetooth v2.0 Bluetooth protocol data transmission module, high stability, ultra-low power consumption, industrial-grade Bluetooth data transmission module. Users do not need to care about complex wireless communication configuration and transmission algorithms. They only need to connect to devices through the TTL serial port. Powered the HC-02 slave module, and can be connected to the mobile phone for data transmission. In addition, it can be used with HC-05 or HC06 hosts (matching code, default is 1234) to connect, can replace a traditional serial line, save wiring work, use it’s very flexible.



Features

 1. Support transparent transmitted with iPhone, integrated with the advantage of Bluetooth 4.0 BLE (Support iPhone 4s version above, cannot connect with the phone’s Bluetooth directly, need a BLE Bluetooth serial port assistant) 2. Compatible with HC-05 and HC-06 Bluetooth serial port module, Bluetooth 2.0 with EDR,

 2 MBPS – 3 MBPS modulation

 3. Built-in 2.4 GHz antennas, users need to debug the antenna 

4. Support transparent transmitted with Android smartphone and notebook computer 

5. Support transparent transmitted with desktop computer via HC-06-USB 

Popular posts from this blog

RASPBERRY PI BASED SURVEILLANCE ROBOT BLOCK DIAGRAM

                                       BLOCK DIAGRAM
Read more

APPLICATIONS

  1)      Military and aerospace embedded software applications 2)      Communication Applications 3)      Industrial automation and process control software 4)      Mastering the complexity of applications. 5)      Reduction of product design time. 6)      Real time processing of ever increasing amounts of data. 7)      Intelligent, autonomous sensors.
Read more

MOTOR DRIVER (L293D)

 Features:  ➢ Wide supply-voltage range: 4.5V to 36V  ➢ Separate input- logic supply  ➢ Internal ESD protection  ➢ Thermal shutdown  ➢ High-Noise-Immunity input  ➢ Functional Replacements for SGS L293 and SGS L293D  ➢ Output current 1A per channel (600 mA for L293D)  ➢ Peak output current 2 A per channel (1.2 A for L293D)  ➢ Output clamp diodes for Inductive Transient Suppression(L293D) DESCRIPTION:  L293D is a dual H-bridge motor driver integrated circuit (IC). Motor drivers act as current amplifiers since they take a low-current control signal and provide a higher-current signal. This higher current signal is used to drive the motors. L293D contains two inbuilt H-bridge driver circuits. In its common mode of operation, two DC motors can be driven simultaneously, both in forward and reverse direction. The motor operations of two motors can be controlled by input logic at pins 2 & 7 and 10 & 15. Input logic 00 or 11 wil...
Read more